Industrial and Manufacturing Washrooms
Industrial and manufacturing washrooms can endure extreme amounts of water degradation, severe temperature changes and high amounts of traffic. Inferior coatings will breakdown and the concrete substrates underneath will be exposed, these failed coatings could potentially cause numerous problems. Loss of plant or manufacturing production due to repairs or contamination in the production lines with fines and possible closure. Less capable coatings wil crack, break and chip up after such strenuous use, forcing the washroom to shutdown and re-apply the coating. Not only does the company have to pay for the cost of another application, they will also be losing money for their shutdown period. Poly Seal will come in and spray their custom polyurea, creating a monolithic waterproof floor coating. The polyurea will hold up against most chemicals, high heat and water pressure without chipping or melting off. The lifetime of a Poly Seal washroom coating is 3-5x the traditional washroom coatings and is worth every penny. Say goodbye to multiple shutdowns due to failed coatings!
The Polyurea coating Poly Seal applies is only as good as the prep behind it. That is why Poly Seal takes great pride in our ability to properly assess a substrate and maintain all engineering and architectural codes on the preparation. Starting with hand sanding, mechanical abrasion, sandblasting and cleaning, Poly Seal makes sure that any surface we spray is 100% ready for the application.
Masking and Lining
Not all jobs are wide open spraying, most of the time Poly Seal will mask off areas to keep containment for the surrounding areas. Along with the preparation, Poly Seal has the capability to tape and plastic all surrounding surfaces that are not being sprayed with Polyurea. This is a vital step to eliminate all overspray and keep the air clean outside of the sprayed area.
Just as important as the preparation and masking, the actual application of 80-150 mills of polyurea is what sets Poly Seal apart from our competition. Our state of the art proportioner and gun lays down a thick, elastic coating to protect the substrate underneath. In most cases, Poly Seal will make 4-5 passes over the area than apply a lite or aggressive aggregate (if needed) followed by a lite texture for aesthetics. Poly Seal can customize the aggregate to the customers specifications for more anti slip or just a different look.
Cleanup and Inspection
Poly Seal knows that getting getting back into production or service is vital for any company. That is why we boast a 30 minute Return to Service Time, by the end of the preparation and spraying, Poly Seal will have the area completely cleaned up and all masking and tape removed so you can get back to work, the SAME DAY! Polyurea has a 30-60 second tack free time which is unparalleled in the coating industry.